30 degrees and windy! But no rain makes it ok, I can't wait to get the project moved into the garage. I just want to get the rear canopy frame off. I got the two front bolts out then I decided to remove all the rusty screws that hold the plastic canopy on, What a job. The Sears screw remover didn't work, so the good old Dremel Tool came to the rescue. I cut flats on each side of the head and out they came. But, not without a wrist workout since the rust builds up down in the nut. Took me all day to take off one side, broke off two screws and one nut plate. Looks like I will be resheeting at least part of the canopy frame, on a bench!
And when putting the canopy back together, there has to be a better way than using steel screws.
And when putting the canopy back together, there has to be a better way than using steel screws.
Comments